帶 EtherNet/IP接口激光測距傳感器
- 產(chǎn)品名稱:帶 EtherNet/IP接口激光測距傳感器
- 產(chǎn)品型號:LDM42EI
- 產(chǎn)品廠商:耶拿
- 產(chǎn)品文檔:
帶 EtherNet/IP接口激光測距傳感器
的詳細介紹帶 EtherNet/IP接口激光測距傳感器 LDM42EI
帶 EtherNet/IP接口激光測距傳感器 LDM42EI
帶 EtherNet/IP接口激光測距傳感器 LDM42EI
The LDM41EI is an optoelectronic distance measuring device for industrial applications with EtherNet/IP interface.
It works contact-free on the principle of comparative phase measurement (amplitude modulation) and facilitates precisely accurate measurement of distances.
Both, the LDM41EI and the LDM42EI distinguish themselves through high precision as well as high independence from the surface of the measuring object. The red, well visible laser beam allows for easy alignment. The LDM42EI has been further developed for fast distance measurements on white surfaces.
Through the integrated EtherNet/IP interface it is possible to read in data of several devices into a control easily.
Applications
0.2 m ... 30 m on almost all natural surfaces, over 100 m achievable depending on the degree of reflection of surfaces
0.1 mm, freely scalable
0.5 mm
0.24 s ... 6 s adjustable or automatically in mode DT
10 V ... 30 V direct currents
RS232, max. Baud rate 38400, ASCII, setting of measuring functions, scaling, measuring time via commands, display of measured values, internal temperature of the device and error code
Programmable switching threshold and hysteresis, "high side" switch, maximum load 0.5 A
Aluminum anodized
4 drill holes for M6 screws, 100 mm x 85 mm
Measuring range1
Measuring uncertainty2
±2 mm under defined measuring conditions3
±3 mm (+15°C ... +30°C)
±5 mm (-10 °C ... +50 °C)
Resolution
Reproducibility4
Measuring time
0.1 s in mode DW on white surface
20 ms in mode DX on white surface (only LDM42EI)
Laser class
Laser class 2 acc. to DIN EN 60825-1:2001-11
Laser divergence5
0.6 mrad
Operating temperature
-10 °C ... +50 °C
Storage temperature
-40 °C ... +70 °C
Supply voltage
Power consumption
Ca. 4 W
Serial interface
Fieldbus6
Profinet
Switching output
Housing material
Size (LxBxH)
187 mm x 96 mm x 50 mm
Weight
850 g
Protection class
IP 65
Shock resistance
10 g / 6 ms (DIN ISO 9022-3-31-01-1)
MTBF
30,000 hours at 25 °C
Mounting
Annotations to technical data:
1
Dependent on target reflectance, influence of extraneous light and atmospheric conditions
2
Statistical spread of 95 %
3
Measurement on planar, vertical white surface at standstill or in continuous movement, + 15 °C to +30 °C
4
Dependent on target reflectance, influence of extraneous light and atmospheric conditions
5
At a distance of 10 m the beam diameter is 6 mm, at 100 m it is 6 cm